Concrete Services in Lykens, PA

UDA Services pours foundations, slabs, driveways, sidewalks, patios, and commercial floors, with crews that prepare the base properly before any truck shows up. Free estimates, permits handled in-house, and a workmanship warranty on the finished pour.

Concrete Work for Homes and Businesses Around Lykens

Our concrete services cover both ends of the work, the structural pours that hold a building up and the flatwork people walk on every day. Foundations, slabs, sidewalks, patios, shed floors, and commercial flooring all come from the same crews, using the same prep standards, whether the job takes one morning or three weeks.

What separates a slab that lasts from one that spiders with cracks in three winters is almost never the concrete itself. It is the base underneath, the reinforcement inside, the joint spacing, and the timing of the finish. That is where our crews spend their attention, on the parts that get buried before anyone sees the surface.

Foundations

UDA Services builds strong, durable foundations engineered to support your structure with precision, long-term stability, and professional craftsmanship.

Sidewalks & Walkways

Sidewalks and walkways poured with the right pitch and control joints, so water drains away from the house instead of pooling against it.

Patios & Outdoor Living Spaces

Poured and stamped concrete patios sized to the furniture and grill layout you actually plan to use, finished in the texture you choose.

Concrete Slabs

UDA Services delivers high-quality concrete slabs for garages, sheds, and buildings, ensuring strength, durability, and perfectly leveled surfaces.

Shed Floors

Shed and outbuilding floors poured flat and square on a compacted base, built to carry mowers, tools, and stored equipment without settling later.

Warehouse & Commercial Flooring

Commercial and warehouse floors placed for heavy traffic, with hardened finishes and epoxy coatings that hold up under forklifts, pallet jacks, and daily loading.

Why Choose UDA Services for Concrete Work

Plenty of contractors offer concrete services around here. The difference shows up before the truck arrives, and in who answers the phone when something needs correcting six months later.

How a Concrete Pour Runs

Five steps, the same order every time, whether the job is a shed floor or a warehouse slab.

Consultation
We walk the site with you, take measurements, talk through thickness, finish, and drainage, then put a written estimate in your hands within one business day.
Preparation
Excavation, grading, and compaction come first, then forms go up square and level and reinforcement gets tied in place so the pour has something solid underneath.
Pour
Concrete arrives inside a scheduled window and gets placed, consolidated, and screeded in one continuous run, because a slab poured in halves is a slab that cracks.
Finish
Floating, troweling, edging, and control joints happen on the clock the concrete sets by, and the surface texture matches whatever you selected back at the estimate.
Final Walkthrough
We walk the finished work with you, explain the cure window and what to keep off it, and note anything that needs correcting before we leave.

Epoxy Flooring and Concrete Coatings

Epoxy goes down over sound concrete in garages, basements, shops, and warehouse space where a bare slab keeps staining, dusting, and wearing through. We prep before we coat, grinding the surface to an open profile, filling cracks and spalled edges, and testing for moisture, because a coating applied over an unprepared slab peels no matter how good the product is.

Finish options run from a single solid color to full flake and quartz systems under a clear topcoat. Garage floors get something that shrugs off road salt, hot tires, and dropped tools. Commercial and industrial floors get coatings rated for chemical exposure and forklift traffic, in a sheen and slip rating that suits the room they are going into.

Cure and return to service times depend on the system, and we give you both numbers before starting so you can plan around the downtime. Most residential garages are back in use within a few days. After that, upkeep comes down to sweeping and the occasional mop, which is the whole point of putting a coating down.

Concrete Work In and Around Lykens

We take concrete jobs across the borough and the townships around it, with crews that travel to the site rather than running everything from a yard. Residential driveways, patios, and garage slabs sit on the same schedule as commercial floors and foundation work. If you are not sure whether your address falls inside the range we cover, call and ask, and you will get a straight answer.

Concrete Work We Take On:

  • Driveways, aprons, and parking pads
  • Garage, shed, and outbuilding floors
  • Basement floors and crawl space slabs
  • Footers and poured foundation walls
  • Sidewalks, walkways, and entry steps
  • Poured and stamped concrete patios
  • Equipment, generator, and HVAC pads
  • Pool decks and surrounding flatwork
  • Warehouse and commercial floor slabs
  • Epoxy and hardened floor coatings

FAQs

Questions that come up most often when people are pricing concrete services, answered the way we would answer them at the estimate.

Light foot traffic is fine after 24 to 48 hours, passenger vehicles after about seven days, and full design strength lands at 28 days. In cold weather we hold off longer on vehicle loads, because freeze damage in the first days is permanent.

 

Yes. The same crews pour residential patios, driveways, and garage slabs, and commercial foundations, loading areas, and warehouse floors. Commercial work carries tighter scheduling and inspection requirements, which we build into the estimate rather than discovering them halfway through.

 

Most residential patios and shed floors go at four inches. Driveways, garage slabs, and anything carrying vehicles get poured thicker, usually six inches with reinforcement. Commercial and warehouse floors get specified against the actual loads and equipment they will carry.

Built right, they run for decades. Durability comes from the base under the slab, the thickness, the reinforcement, the joint layout, and the finish, in roughly that order. Skip any one of them and the floor fails early regardless of the mix.

Usually yes, as long as the slab is structurally sound. We grind the surface to an open profile, fill cracks and spalls, strip old coatings, and test for moisture first. Slabs younger than 28 days need to finish curing before anything goes over them.

Call Us

+1 (717) 497-9398

Email

sales@udaservices.com

Address

1629 Valley Rd. Lykens PA. 17048

Opening Hours

Mon–Fri 8am–5pm

Name
Scroll to Top